Rubber Mats
The DynaCushion Play Mat is a patented product that is intended for use to provide or enhance playground safety.
The DynaCushion Play Mat is composed of reclaimed tire rubber glued together with a non-soluble adhesive to form the 4 ft. x 6ft. x 2 inches thick design. The reclaimed rubber contains no metals. The rubber is passed by a magnet and through a shaker screen to ensure proper removal of any metal prior to manufacturing.
The DynaCushion Play Mat provides a fall height of 5 feet at an ambient temperature of 73 degrees F.
The DynaCushion Play Mat has been designed as a simplified method to stabilize and limit the loss or displacement of loose-fill material in areas of high traffic and/or kick-out on playgrounds. The DynaCushion mat may also be used to provide a stable slip-resistant access surface glued to a solid sub surface.
One side of the DynaCushion is flat and rough and the other side is designed featuring V-shaped grooves.
The DynaCushion Play Mat is permeable, allowing water to flow through.
The DynaCushion Play Mat can stand alone or be used in conjunction with loose fill material such as sand, pea gravel, and wood fiber safety surfaces to reduce kick-out underneath playground equipment. Each DynaCushion weighs 192 (+ or – 3 lbs.) pounds.
DynaCushion can be supplied with Beveled Safety Edges, which are advisable where the mats will create a drastic difference in terrain such as when applied on a cement of black top base.
When Beveled Safety Edges are used, the DynaCushion mats are specially fabricated to a thickness of 2-1/4” to accommodate the edge units. The fall height rating and pricing is the same as the 2” thick version. Beveled Safety Edges are to be adhered in the field to the edges of their corresponding DynaCushion using DynaGrip Adhesive.
Oddly shaped playground layouts can be cut to size in the factory to enable easy on site assembly with minimal if any onsite trimming required.
